Clairity Cleaning Checklist

Kitchen Cleaning

Kitchen cleaning includes sanitizing and refreshing all accessible surfaces to remove grease, food residue, dust, and general buildup. Countertops, backsplashes, and high‑touch areas are wiped using plant‑based multipurpose cleaner, E‑cloths, or a soap/vinegar solution with a scrubby depending on the level of residue. Sinks and faucets are cleaned and polished to remove food, grime, and stuck‑on debris.

Sink & faucet

Cleaning the sink and faucet includes removing soap residue, water spots, toothpaste splatter, food debris, and light buildup from all accessible surfaces. The basin, drain area, faucet body, handles, and surrounding edges are cleaned using a plant‑based multipurpose cleaner or a soap/vinegar solution applied with a scrubby. Tougher spots may be gently scrubbed to lift grime without damaging finishes. Stainless steel fixtures may require polish to restore a smooth, streak‑free shine. Eco‑friendly cleaning options are available upon request, leaving the sink and faucet fresh, sanitary, and well‑maintained.

Outside & inside of microwave

Cleaning the microwave includes wiping down both the exterior and interior surfaces to remove fingerprints, smudges, food splatter, spills, and light buildup. The outside surfaces (door, handle, buttons, and sides) are cleaned using e‑cloths and a plant‑based multipurpose cleaner to ensure a streak‑free, polished appearance. The interior is cleaned by removing crumbs, dried food, and residue from the walls, ceiling, turntable, and door frame. E‑cloths, a plant‑based multipurpose cleaner with a rag, or soap and a brush are used depending on the level of buildup. Tougher spots may be gently scrubbed to lift stuck‑on food without damaging the interior finish. All surfaces are checked to ensure they are clean, sanitary, and free of odors. Eco‑friendly cleaning options are available upon request, leaving the microwave fresh, tidy, and well‑maintained.

Stove Top

Stove top cleaning includes removing grease, food splatter, dust, and cooked‑on residue from all accessible surfaces. Burners, grates, and drip pans are lifted and cleaned using plant‑based multipurpose cleaner, a stove cleaner solution, or a scrubby depending on the level of buildup. The stove surface is wiped thoroughly to remove grease films and stuck‑on debris, with extra attention given to edges, seams, and high‑touch areas around knobs and controls. Grates and removable parts are scrubbed to restore a clean, uniform finish. The surrounding area, including the front lip and sides, is wiped to remove splatter and residue. All surfaces are checked for streaks or remaining buildup, leaving the stove top clean, refreshed, and well‑maintained.

Outside of oven

Cleaning the outside of the oven includes wiping down all exterior surfaces to remove fingerprints, smudges, grease, dust, and light buildup. This includes the door front, handle, control panel, glass window, trim, and surrounding edges. E‑cloths and a plant‑based multipurpose cleaner are used to safely lift residue without scratching stainless steel, glass, or painted finishes. For stainless steel models, polish may be applied when needed to restore a smooth, streak‑free shine. Eco‑friendly cleaning options are available upon request, leaving the oven exterior clean, polished, and well‑maintained.

Outside of stove hood

Cleaning the outside of the stove hood includes removing grease, dust, steam residue, and light buildup from all accessible exterior surfaces. This includes the front panel, underside lip, sides, buttons, switches, and high‑touch areas. E‑cloths are used to safely lift residue without scratching stainless steel or painted finishes. For tougher grease spots, a plant‑based multipurpose cleaner or soap‑and‑water treatment may be applied. When appropriate, a stainless‑steel polisher is used to restore a smooth, streak‑free shine. Eco‑friendly cleaning options are available upon request, leaving the stove hood exterior clean, polished, and well‑maintained.

Outside of refrigerator

Cleaning the outside of the refrigerator includes wiping down all exterior surfaces to remove fingerprints, smudges, dust, food splatter, and light buildup. This includes the doors, handles, edges, top surface, and side panels. E‑cloths are used to safely lift residue without scratching stainless steel, painted finishes, or textured surfaces. When needed, a stainless‑steel polisher is applied to restore a streak‑free, uniform shine. High‑touch areas receive extra attention to ensure a polished, well‑maintained appearance. Eco‑friendly cleaning options are available upon request, leaving the refrigerator exterior clean, fresh, and tidy.

Outside of dishwasher

Cleaning the outside of the dishwasher includes wiping down all exterior surfaces to remove fingerprints, smudges, water spots, and light buildup. This includes the door front, handle, control panel, edges, and surrounding trim. E‑cloths and a plant‑based multipurpose cleaner are used to safely lift residue without scratching stainless steel or painted finishes. For stainless steel models, polish may be applied when needed to restore a smooth, streak‑free shine. Eco‑friendly cleaning options are available upon request, leaving the dishwasher exterior clean, fresh, and well‑maintained.

Wipe down/dust tables and chairs

Wiping down tables and chairs includes removing dust, fingerprints, food residue, and light debris from all accessible surfaces. This includes table tops, legs, edges, chair seats, backs, and high‑touch areas such as armrests and undersides. A plant‑based multipurpose cleaner and a cloth are used to safely lift dirt, oils, and buildup without harming finishes. Magic erasers or soap‑and‑water spot treatments may be used for tougher marks when appropriate. All surfaces are checked to ensure they are clean, streak‑free, and free of crumbs or sticky spots, leaving dining and seating areas fresh, sanitary, and well‑maintained.

Empty trash

Emptying trash includes removing waste from all designated bins throughout the home, including bathroom, kitchen, and bedroom receptacles. Bathroom trash cans are emptied and relined to maintain a fresh, sanitary space. Kitchen trash is collected and the liner replaced, ensuring the main waste area stays clean and ready for use. Bedroom trash bins are emptied and relined to keep personal areas tidy and free of clutter. All collected waste is tied securely and placed in the client’s preferred disposal location, leaving each room refreshed and free of debris.

Bathrooms

Bathroom cleaning includes sanitizing and refreshing all accessible surfaces to remove soap scum, hard water, dust, hair, and general buildup. Sinks, faucets, and countertops are wiped and polished using plant‑based multipurpose cleaner, E‑cloths, or a soap/vinegar solution with a scrubby depending on the level of residue. Toilets are cleaned inside and out using plant‑based multipurpose cleaner on the seat, base, and surrounding floor area. A brush and pumice stone are used to clean the inside of the bowl to remove mineral deposits and stubborn stains. Showers and tubs are treated with specialty cleaners to lift grime, product buildup, and water spots, with extra attention given to glass, tile, and fixtures. Mirrors are wiped streak‑free using E‑cloths, and cabinet exteriors are spot cleaned as needed. Floors are vacuumed and mopped to remove dust, hair, and residue, leaving the bathroom fresh, hygienic, and well‑maintained.

Mirrors

Cleaning mirrors involves removing fingerprints, smudges, dust, and streaks from all household mirrors to restore a clear, polished reflection. We use high‑quality e‑cloths, which are eco‑friendly, mirror‑safe, and designed to clean effectively using only water. This method lifts residue without chemicals, protects delicate finishes, and ensures a streak‑free shine. Each mirror is checked from multiple angles to confirm clarity and consistency, leaving bathrooms, bedrooms, and common areas bright and spotless.

Toilet

Toilet cleaning includes sanitizing and refreshing all accessible surfaces to remove germs, residue, hard‑water buildup, and mineral deposits. The exterior surfaces — including the seat, lid, base, hinges, and surrounding floor area — are cleaned using plant‑based multipurpose cleaner to remove dust, splashes, and general buildup. The inside of the bowl is scrubbed thoroughly using a toilet brush and pumice stone as needed to lift mineral deposits, rings, and stubborn stains. The flush handle and other high‑touch areas are sanitized to ensure a hygienic finish. All treated surfaces are checked for remaining residue, leaving the toilet clean, fresh, and well‑maintained.

Shower/tub

Shower and tub cleaning includes removing soap scum, hard water, product buildup, and grime from all accessible surfaces. Specialty cleaners are applied to lift residue from tile, fiberglass, acrylic, and glass. Fixtures, handles, and trim are scrubbed to remove water spots and mineral deposits. Glass doors are treated to clear streaks, spots, and cloudy buildup, while tile and grout receive focused attention to remove residue and brighten the surface. Shelves, ledges, and corners are wiped to remove product drips and collected debris. The tub basin or shower floor is scrubbed thoroughly to remove grime and restore a clean, refreshed appearance. All surfaces are rinsed and wiped to ensure a uniform, hygienic, and well‑maintained finish.

Dusting Furniture

Dusting furniture involves removing loose dust, debris, and buildup from all reachable surfaces using tools appropriate for each material. Our team uses a variety of dusting methods, including feather dusters for light surface dust, microfiber cloths paired with polishing solutions when safe for the finish, and e‑cloths that clean effectively with only water. This ensures every piece of furniture is cleaned gently, safely, and thoroughly according to its specific surface needs.

Vacuum Floors

Vacuuming floors includes removing dust, dirt, pet hair, and debris from all accessible carpeted and hard‑surface areas throughout the home. This task covers high‑traffic zones, edges, and corners where buildup commonly collects, as well as rugs and runners. The vacuum is used appropriately for each floor type to ensure effective debris removal without causing damage. Thorough vacuuming helps maintain a clean, fresh appearance in kitchens, hallways, bedrooms, living spaces, and entry areas.

Vacuuming stairs

Vacuuming stairs includes removing dust, dirt, pet hair, and debris from each step, riser, and edge. Cleaners work methodically from top to bottom, using the vacuum’s hose, brush, or crevice attachments to reach corners, trim, and tight areas where buildup collects. High‑traffic steps and carpeted treads are given extra attention to lift embedded debris. Hard‑surface stairs are vacuumed to remove loose dirt before any additional cleaning steps. All accessible areas are checked to ensure a clean, uniform appearance and a safe, debris‑free staircase.

Mop floors

Mopping floors includes removing dirt, dust, spills, residue, and light buildup from all accessible hard‑surface flooring throughout the home. This task follows sweeping or vacuuming to ensure loose debris is cleared before wet cleaning. Depending on the floor type, tools may include professional mops, a soapy rag, or scrub brushes for tougher spots. Appropriate cleaning solutions are used to lift grime without damaging hardwood, tile, laminate, or vinyl finishes. Each area is checked to ensure streak‑free, refreshed floors that leave kitchens, bathrooms, hallways, and living spaces looking clean and well‑maintained. Eco‑friendly cleaning options are available upon request.

Spot clean/dust baseboards

Spot cleaning and dusting baseboards includes removing dust, dirt, scuff marks, and light debris from all accessible trim throughout the home. Depending on the level of buildup, tools may include feather dusters for quick dust removal, magic erasers for scuff and mark treatment, or soap and water applied with a rag or brush for deeper cleaning. Dust, grime, and residue are lifted without damaging paint or trim finishes. Each baseboard is checked to ensure edges, corners, and detailed molding are clean, leaving rooms looking fresh, tidy, and well‑maintained.

Remove cobwebs

Removing cobwebs includes clearing webs, dust, and light debris from ceilings, corners, wall edges, vents, and other hard‑to‑reach areas throughout the home. Tools such as extendable dusters, microfiber cloths, or professional feather dusters are used to lift cobwebs gently without damaging paint, trim, or textured surfaces. High corners, ceiling lines, behind furniture, and entryway areas are checked to ensure all visible cobwebs are removed, leaving each room looking clean, fresh, and well‑maintained.

Windowsills

Cleaning windowsills includes removing dust, debris, and buildup from all accessible sill surfaces throughout the home. This task ensures the areas beneath and around windows remain clean, tidy, and free of dust, debris and allergens. Using appropriate tools such as microfiber cloths, professional feather dusters, or e‑cloths, dust is lifted gently without damaging paint, trim, or window frames. The goal is to leave each windowsill looking fresh and well‑maintained, enhancing the overall cleanliness of bedrooms, living spaces, kitchens, and bathrooms.

Make beds & change linens (if provided)

We make your beds so they look neat, smooth, and inviting. If you provide fresh linens, we’ll remove the used bedding and remake the bed with clean sheets and pillowcases, leaving everything crisp and comfortable.

Couch

Couch cleaning and vacuuming includes removing dust, dirt, crumbs, and pet hair from all accessible upholstered surfaces. Cushions are lifted and vacuumed underneath, and the crevice tool is used along seams, edges, and tight areas where debris collects. The couch’s back, arms, and base are vacuumed to lift loose particles and refresh the fabric. Spot cleaning may be performed using plant‑based multipurpose cleaner, E‑cloths, or soap and warm water depending on the material and level of buildup. All treated areas are checked to ensure a clean, uniform appearance while maintaining the integrity of the upholstery.

Clean exterior of cabinets & drawers (upon request)

Cleaning the exterior of cabinets and drawers includes wiping down visible marks, fingerprints, smudges, and light buildup on doors, drawer fronts, handles, and surrounding trim. E‑cloths, wood polish, or a plant‑based multipurpose cleaner are used depending on the cabinet material and finish. Areas with heavier residue may be gently scrubbed to lift grime without damaging painted, stained, or sealed surfaces. All treated spots are checked to ensure a clean, uniform appearance that maintains the cabinet’s finish and overall presentation.

Dust light fixtures

Dusting light fixtures includes removing surface dust, cobwebs, and debris from all accessible ceiling, wall‑mounted, and hanging fixtures throughout the home. Tools such as microfiber cloths, e‑cloths, professional feather dusters, or specialized brushes are used depending on the fixture’s material and design. For heavily soiled fixtures, covers or globes may be carefully removed for a deeper clean to lift grime without damaging finishes. Each fixture is checked to ensure the surfaces, edges, and surrounding areas are free of dust, leaving rooms brighter, cleaner, and well‑maintained.

Ceiling fans

Cleaning ceiling fans includes removing dust, debris, and buildup from all accessible fan blades, housings, and light fixtures. Depending on the level of dust and the fan’s material, cleaners may use a professional feather duster, E‑cloths with no product, a cloth with plant‑based multipurpose cleaner, or soap and warm water for heavier residue. Each blade is wiped thoroughly to lift dust. The motor housing, pull chains, and light covers are also cleaned to ensure a uniform, well‑maintained appearance. If the fan is positioned higher than the reach of Clairity Cleaning’s stepladders, access to the client’s ladder is required to safely complete the task. Eco‑friendly cleaning options are available upon request. All surfaces are checked for remaining dust and streaks, leaving the ceiling fan clean, refreshed, and functioning without circulating debris.

Clean tops of kitchen cabnets

Cleaning the tops of kitchen cabinets includes removing dust, debris, grease, and buildup from all accessible upper cabinet surfaces. The area is first assessed for the level of residue, then treated with the appropriate cleaning method. A plant‑based multipurpose cleaner is used for standard dust and light grime. For heavier grease or stuck‑on residue, soap and a scrub brush may be used to lift buildup safely. When cabinets are made of wood, wood polish is applied after cleaning to restore shine and protect the finish. All surfaces are wiped thoroughly to ensure a clean, fresh, and well‑maintained appearance.

Dust air vents

Dusting air vents includes removing surface dust, lint, grease, and light debris from all accessible vent covers throughout the home. This task supports cleaner airflow and reduces visible buildup on wall, ceiling and floor vents. Depending on the level of buildup, tools may include microfiber cloths, professional feather dusters, specialized vent brushes, or full dismantling of the vent cover for a thorough scrub in the sink with soap and water. Dust and debris are lifted without damaging paint, trim, or vent finishes. Each vent is checked to ensure the slats and surrounding edges are clean, leaving bedrooms, living areas, hallways, and common spaces looking well‑maintained.

Inside of oven

Cleaning the inside of the oven includes removing baked‑on food, grease, spills, and heavy buildup from all accessible interior surfaces. The racks, walls, floor, and door interior are inspected for residue and treated based on the level of buildup. Standard cleaning is performed using a plant‑based multipurpose cleaner for light debris when appropriate. For tougher, baked‑on areas, an oven‑safe cleaner may be applied. The cleaner is sprayed inside the oven and allowed to sit for an hour or longer to break down heavy residue. After the dwell time, the interior is scrubbed thoroughly to lift loosened grime, then wiped clean to remove remaining residue. All surfaces are checked to ensure they are clean, and sanitary for baking. Eco‑friendly cleaning options are available upon request, leaving the oven interior fresh, safe, and well‑maintained.

Inside of refrigerator/freezer

Cleaning the inside of the refrigerator or freezer includes removing food residue, spills, crumbs, and light buildup from all accessible interior surfaces. Shelves, drawers, door bins, and interior walls are wiped down using e‑cloths, a plant‑based multipurpose cleaner with a rag, or soap and a brush for tougher spots. Items may be temporarily moved to allow thorough cleaning of corners and undersides. All surfaces are checked to ensure they are clean, sanitary, and free of sticky areas or lingering odors. Eco‑friendly cleaning options are available upon request, leaving the interior fresh, organized, and well‑maintained.

Clean inside of closet

Cleaning the inside of a closet includes removing dust, debris, and light buildup from shelves, baseboards, corners, and accessible wall surfaces. Floors are vacuumed or swept to clear lint, dirt, and clothing fibers, and any visible marks on shelves or walls may be spot cleaned using microfiber cloths, magic erasers, or soap and water with a rag or brush. The goal is to leave the closet interior fresh, tidy, and free of dust, ensuring storage areas feel clean, organized, and well‑maintained.

Wipe down doors

Wiping down doors includes removing dust, fingerprints, smudges, and light debris from all accessible door surfaces throughout the home. This includes the door face, edges, trim, and high‑touch areas such as around handles and knobs. Depending on the level of buildup, tools may include microfiber cloths, e‑cloths, magic erasers for scuff treatment, or soap and water applied with a rag or brush for deeper cleaning. Dirt, oils, and residue are lifted without damaging paint, wood, or finish. Each door is checked to ensure surfaces and surrounding trim look clean, fresh, and well‑maintained.

Clean Interior of Cabinets (Move‑Out)

Cleaning the interior of cabinets during a move‑out includes removing dust, crumbs, residue, and buildup from every accessible surface. Shelves, walls, and corners are wiped using plant‑based multipurpose cleaner or a soap/vinegar solution with a cloth or scrubby depending on the level of residue. Hardware, hinges, and edges are cleaned to remove grime and fingerprints. Any sticky spots, spills, or old product residue are scrubbed until the surface is uniform and refreshed. Shelves receive detailed attention to ensure no debris remains. Once cleaned, surfaces are dried and left ready for move‑out inspection, providing well‑maintained cabinet interior.